Hello friends, Today I am going to share with you the velvet liner I made to line the inside of a large galvanized metal tub. I love the combination of this rustic bin and the softness of velvet. I have decided to make a liner for this bin out of a scrap piece of velvet. My little boy has helped me a lot from time to time, as you can see in the pictures below. 🙂
I found this great tub at my local estate store for just $6. One thing to consider when you purchase an older/used metal container is rust. The last thing you want is to spend time and energy making a liner for a rusty/old metal bucket only to have it leave rust stains on your white carpet. If your bucket/bin is rusty, WALK AWAY!
As you can see, this metal bin is in great shape. I want to use it to store some of my Little Man’s teddy bears, but I am afraid that the metal sides might snag the soft furry arms and legs of his little critters. I love the combination of this rustic bin and the softness of velvet.
1. Take your Measurements and Cut your Fabric
Measure the depth of the side wall & add 3 inches to your length. (This will allow for 1/2 inch seam allowance, and the edge that gets folded over the side).
Next measure the circumference of the top edge of the bin. In our case it was 64 inches. Add 1 inch onto this number to accommodate for your seam allowance. (This is Sarah by the way, my ever helpful assistant!) we need a 13″ wide by 65″ long piece of fabric.
Floor of Bin:
The piece of velvet covering the bottom of the bin can be measured by simply placing the bin on the wrong side of the fabric and drawing a circle around the edge.
Cut out your circle. Do not cut on the line, make your circle a little larger.
2. Let’s Sew
After all your edges are surged, fold over the top edge of your 64″ sidewall piece and sew.
Fold your 64″ long piece of fabric right sides together, and sew along the edge, creating a continuous circle.
The next step is to sew the circular base to the long side wall piece. Right sides together of course. The circumference of the circle is smaller than the circumference of your side wall piece of fabric, so you will have to put loose pleats into the side wall fabric. This does create a “baggier” look at the bottom of the bin, but it allows the fabric to fit correctly at the top. (If you look at the picture above closely, you will see the pleats in the top piece of fabric).
Voila! You are finished. Just stretch your lining over your bin, and sit back and admire your work.